{"id":10207,"date":"2026-09-05T15:07:36","date_gmt":"2026-09-05T07:07:36","guid":{"rendered":"https:\/\/kelyland.com\/?p=10207"},"modified":"2026-09-01T15:10:32","modified_gmt":"2026-09-01T07:10:32","slug":"luftzelt-ce-zertifizierung-uberprufen","status":"publish","type":"post","link":"https:\/\/kelyland.com\/de\/inflatable-tent-ce-certification-check\/","title":{"rendered":"CE-Kennzeichnung: Wie Sie sie bei aufblasbaren Zelten aus China \u00fcberpr\u00fcfen"},"content":{"rendered":"

The inflatable tent CE certification check starts on the factory floor, where operators weld seams and glue valve bases, not in the email thread with the attached PDF. The operator running the high-frequency welding press checks each seam twice; the certificate sitting in the front office might cover only the electric pump. That gap is how a buyer got burned on a $50,000 order last season \u2014 the pre-production sample passed inspection<\/a>, then the mass production run arrived with a mark that had nothing to do with the tent structure.<\/p>\r\n

Certificate validity comes down to two checks. The Notified Body number printed beside the CE logo has to match an entry in the NANDO database; if it doesn’t, the document is invalid even when it looks official. The Declaration of Conformity must name the exact product model, cite EN 14960 or the relevant EU directive, and carry a dated signature. With the General Product Safety Regulation now shaping EU market access, an email attachment that simply says ‘CE certified’ is a sales prop, not a compliance document.<\/p>\r\n

Kelyland Outdoors pre-vets its core factories on exactly this distinction. When the certificate scope already matches the inflatable structure, the welded seams, and the finished model number, an inflatable tent CE certification check becomes a thirty-minute document review instead of a three-week validation. That’s how compliance should work: the standard gets fixed at sample approval, and the quality tolerance agreed then holds through container loading.<\/p>\r\n

\r\n
\"Portable
Innovative inflatable camping tent by Terra Force, designed for quick setup and durability.<\/figcaption><\/figure>\r\n<\/figure>\r\n

Understanding CE Requirements for Inflatable Tents<\/h2>\r\n
\r\n

A CE mark on the pump doesn’t certify the tent.<\/p>\r\n<\/blockquote>\r\n

CE marking on an inflatable tent is not a single certificate. It’s a stack of requirements covering the air structure, the pump, and any electrical components. Most Chinese suppliers know this. The problem is they don’t always tell you which part of the product their CE file actually covers \u2014 and customs won’t sort it out for you.<\/p>\r\n

Which directives apply<\/h3>\r\n

Inflatable camping tents fall under the General Product Safety Regulation (GPSR 2023\/988), which replaced the old GPSD in December 2026. Because no dedicated harmonized standard exists for air-frame camping tents, EU market surveillance bodies reference EN 14960 \u2014 the standard for inflatable play equipment \u2014 to evaluate structural integrity, air pressure retention, and anchoring. Your supplier’s test report should name EN 14960 and the GPSR explicitly.<\/p>\r\n

The connection between EN 14960 and camping tents is simple: both products fail the same way. A ruptured air beam<\/a> or a leaking weld seam collapses the structure, and someone inside gets hurt. So the standard’s pressure decay limits and seam strength requirements get applied to tunnel tents, glamping domes, and inflatable awnings even though EN 14960 was written with bouncy castles in mind.<\/p>\r\n

Notified Bodies and the NANDO database<\/h3>\r\n

A Notified Body is an organization the European Commission authorizes to assess products against specific directives. Each one receives a four-digit identification number. That number is traceable in the NANDO database \u2014 the official EU registry of every active Notified Body. If the number on a supplier’s certificate doesn’t appear in NANDO, the certificate was not issued by an authorized body. Treat it as invalid.<\/p>\r\n

The most common trap in China sourcing: a factory presents a CE certificate for the electric air pump, then ships an inflatable tent that was never tested as a complete structure. The pump passes the Low Voltage Directive. The tent passes nothing. Import authorities catch the mismatch, and you’re left with a container held at port and a retail launch window gone.<\/p>\r\n